The group of cases pictured, starting on from the left are: 4x10, 5x7, 6.5x8.5, & 8x10. The case on the right is an 6.5x8.5 and is open to show how the holders are layed out inside between the fabric covered foam separators, and the heat insulated and 1" lined foamed walls surrounding the filmholders.

This 7x17 Cordura filmholder case in dark blue holds up to 3 filmholders and weigh in at just over a pound. These cases comes in, for now, in teal, and silver color cordura. Cordura comes in a 420 to 600 denier weave, a very strong, tear, and water resistant material. All our cases come with two zippers. Have a black nylon strap which one can carry in hand or stretches out to carry over the shoulder. These smaller cases range from 4x5, 4x10, 5x7, 6.5x8.5, and 8x10. Inside these cases are 2 to 5, or more foam-lined dividers to separate the holders and keep them from damaging each other. All the larger cases come standard to hold 3 filmholders of the same size, such as, 7x17, 8x20, 11x14, 14x17, 12x20, 16x20, 18x22, and 20x24. Inside these cases are 2 to 4, or more foam-lined dividers to separate the holders and keep them from damaging each other. To protect the filmholders from damage, when a case is accidentally dropped from a distance of 3 feet, or lightly bumped into a wall, we added a 1" wall of foam around the filmholders between the fabrics. And, the fabric used inside to line it, is a water-resistant black nylon material that has a fine silkiness about it, to help keep your holders from scratching or marring.

For those that need to take that one and only chance-of-a-life-time shot, and you need just one holder to do it in... This case is for you!
Made of the cordura color or your choice, this handy little single case will help you get your filmholder there without a scratch. But, be careful not to drop it, for it does not have the 1" custioning that the bags have. It does have a small amount of custioning to help protect the holder from light damage. These single cases come with a nylon handle, velcro on the flap to close up the case so as to help keep dust and dirt out. And, a black ribbed nylon liner to help keep your holder from scatching or marring.

For that photographer who needs to keep their lensboards and lenses from dust, water, and the elements. These cases have belt loops. Come with a zipper to close-up your cases tight. They have a 1/4" of foam to help protect the lenses. And are made of cordura with a black ribbed-nylon liner.

Home | Filmholders | CPF | Cases | R&R | Wind SK | Plastics | Letters | Links | Cordura Cases